French drain vs. gutter: pros and cons

Project is simple but labor intensive

By Inman News Feed
Add Comment Add Comment | Comments: 0 | Posted May. 25, 2011

Share this Story:

At the low point of the system connect a solid (no holes) 4-inch pipe and extend it to a point where it can discharge onto the surface. It may be necessary to discharge the water into a dry sump, a hole 6 inches or so deeper than the bottom of the discharge pipe and filled with gravel to allow the water to percolate into the ground.

Contact Bill and Kevin Burnett:
Email Email Letter to the Editor Letter to the Editor

Prev| Page: 1 2
Add to favoritesAdd to Favorites PrintPrint Send to friendSend to Friend



(HTML and URLs prohibited)